P0145 O2 Sensor Circuit Slow Response Bank 1 Sensor 3

P0145 points to a slow oxygen sensor response on bank 1 sensor 3. The third downstream sensor on bank 1 changes slower than expected.

Code details

Generic OBD-II · P0

System: Fuel / Air
Code type: Generic (SAE / ISO controlled)
Standard: SAE J2012 / ISO 15031-6

Diagnostic boundary

A diagnostic trouble code reports that a monitored test failed. It does not prove one specific part is bad, and manufacturer logic can add vehicle-specific conditions.

Do not replace the catalyst before confirming bank 1 sensor 3 heater and signal response are valid.

Symptoms of P0145

Check-engine light on, sometimes with rough or uneven running.
Hesitation, surging, or a noticeable change in fuel economy.
Occasionally hard starting or a smell of unburnt fuel.

Common causes of P0145

A failing or contaminated sensor (MAF, MAP, oxygen or air-fuel sensor).
Intake or vacuum leaks, or an exhaust leak near an upstream sensor.
Wiring, connector, or fuel-delivery problems that skew the reading.

Useful checks before replacing parts

Compare bank 1 sensor 3 response during commanded fuel changes, deceleration fuel cut, catalyst monitor activity, and heater warm-up.
Inspect heater operation, exhaust leaks, sensor contamination, connector condition, wiring heat damage, and catalyst-related companion codes.
Verify sensor position and bank layout before judging response speed or replacing the downstream oxygen sensor.

Related OBD-II codes

These nearby fuel / air entries can help compare wording and pin down the fault area.