Code status
Needs verification
Not yet verified against SAE J2012_202509 / J2012DA. Treat unverified rows as a lookup aid, not repair authority.
- System
- Transmission
- Scope
- iso-sae-controlled-p0
- Standard
- SAE J2012 / ISO 15031-6
- Source
- legacy-import
Diagnostic boundary
A diagnostic trouble code reports that a monitored test failed. It does not prove one specific part is bad, and manufacturer logic can add vehicle-specific conditions.
Do not condemn hydraulic parts before checking pressure sensor A wiring and whether pressure is actually high.
Useful checks before replacing parts
- Check for short-to-voltage, open ground, connector damage, internal harness faults, or pressure sensor A stuck high.
- Compare pressure data with commanded pressure, gear state, fluid temperature, and shift feel.
- Review pressure-control solenoid and line-pressure codes that may explain actual high pressure.
Related OBD-II codes
These nearby transmission entries can help compare wording and fault area. They may share the same verification status as the source database.