P0A60 Drive Motor B Stator Temperature Sensor Circuit High

P0A60 points to a high condition in the Drive Motor B stator temperature sensor circuit. The controller sees stator temperature above the expected signal range.

Code status

Needs verification

Not yet verified against SAE J2012_202509 / J2012DA. Treat unverified rows as a lookup aid, not repair authority.

System: Hybrid / EV
Scope: iso-sae-controlled-p0
Standard: SAE J2012 / ISO 15031-6
Source: legacy-import

Diagnostic boundary

A diagnostic trouble code reports that a monitored test failed. It does not prove one specific part is bad, and manufacturer logic can add vehicle-specific conditions.

Do not continue driving if the high stator temperature reading may represent real Motor B overheating.

Useful checks before replacing parts

Compare Motor B stator temperature with actual operating load, inverter temperature, coolant flow, ambient temperature, freeze-frame data, and high-input codes.
Inspect for open sensor circuits, short-to-voltage faults, poor grounds, connector corrosion, cooling restrictions, and real motor overheating.
Measure signal and ground voltage under operating load to determine whether the high reading is electrical or thermal.

Related OBD-II codes

These nearby hybrid / ev entries can help compare wording and fault area. They may share the same verification status as the source database.