P0AAD Hybrid/EV Battery Positive Contactor Control Circuit High

P0AAD points to a high condition in the hybrid or EV battery positive contactor control circuit. Control voltage or feedback is above expected range.

Code status

Needs verification

Not yet verified against SAE J2012_202509 / J2012DA. Treat unverified rows as a lookup aid, not repair authority.

System: Hybrid / EV
Scope: iso-sae-controlled-p0
Standard: SAE J2012 / ISO 15031-6
Source: legacy-import

Diagnostic boundary

A diagnostic trouble code reports that a monitored test failed. It does not prove one specific part is bad, and manufacturer logic can add vehicle-specific conditions.

Do not ignore a high positive contactor control signal because it can affect high-voltage shutdown behavior.

Useful checks before replacing parts

Review positive contactor command, control voltage, feedback voltage, 12-volt supply, driver state, pack voltage, and freeze-frame data.
Inspect for short-to-voltage faults, open grounds, backfeed through control wiring, stuck driver outputs, connector corrosion, and water intrusion.
Verify whether the positive contactor control circuit remains high when the contactor is not commanded.

Related OBD-II codes

These nearby hybrid / ev entries can help compare wording and fault area. They may share the same verification status as the source database.