Code status
Needs verification
Not yet verified against SAE J2012_202509 / J2012DA. Treat unverified rows as a lookup aid, not repair authority.
- System
- Transmission
- Scope
- iso-sae-controlled-p0
- Standard
- SAE J2012 / ISO 15031-6
- Source
- legacy-import
Diagnostic boundary
A diagnostic trouble code reports that a monitored test failed. It does not prove one specific part is bad, and manufacturer logic can add vehicle-specific conditions.
Do not condemn the valve body or gearset for an electrical code until the solenoid A circuit is tested end to end.
Useful checks before replacing parts
- Check solenoid A power feed, control circuit, internal harness, case connector, terminal tension, and fluid intrusion.
- Measure circuit resistance or current only with service-information limits for the transmission model.
- Look for other solenoid electrical codes that share the same feed or connector path.
Related OBD-II codes
These nearby transmission entries can help compare wording and fault area. They may share the same verification status as the source database.