P0767 Shift Solenoid D Stuck On

P0767 indicates shift solenoid D is stuck on. The controller sees gear or pressure behavior consistent with the solenoid remaining applied.

Code details

Generic OBD-II · P0

System: Transmission
Code type: Generic (SAE / ISO controlled)
Standard: SAE J2012 / ISO 15031-6

Diagnostic boundary

A diagnostic trouble code reports that a monitored test failed. It does not prove one specific part is bad, and manufacturer logic can add vehicle-specific conditions.

Do not replace the transmission assembly before checking solenoid D operation and valve-body contamination.

Symptoms of P0767

Harsh, delayed, or slipping shifts, or being stuck in one gear.
Check-engine light, sometimes with limp-home mode.
Flaring RPM or a shudder under load.

Common causes of P0767

Low or degraded transmission fluid.
A failing speed sensor, shift solenoid, or pressure-control circuit.
Wiring, connector, or internal hydraulic/mechanical faults.

Useful checks before replacing parts

Monitor solenoid D command, actual ratio, input speed, output speed, and pressure data during the affected gear change.
Check for debris, fluid contamination, valve-body sticking, solenoid mechanical sticking, or wiring shorts.
Use related shift and ratio codes to narrow the hydraulic circuit involved.

Related OBD-II codes

These nearby transmission entries can help compare wording and pin down the fault area.